WORKHOLDING DEVICES

Approx. Rs 2,500 / PieceGet Latest Price

Product Details:

MOULD CLAMP

MCST SERIES MOULD CLAMP - SLIDER TYPE - MOST IDEAL FOR LIGHT AND MEDIUM DUTY MOULDS

Our nes MSCT series clamp solves the problem where forward and backward slidin of clamps is required but there are no T-slots on the platen. Clamp is mounted with one front screw on the sliding rail to be screwed on any one suitable threaded hole on the platen. Rear main screw is tightened for clamping after sliding the clamping arm to appropriate position and then can be slided back after declamping.

MCST series clamp with M16 T-nut provided can be used for clamping on T-slot table of Drilling, Milling or any other machine tool.

MODEL                      SUITABLE FOR T-SLOT SIZE
MCST-16T-18                              18
MCST-16T-20                              20
MCST-16T-22                              22
MCST-16T-24                              24
MCST-16T-28                              28

Approx. Rs 7,465 / PieceGet Latest Price

Product Details:

Low base design with totally enclosed acme screw operating in a steel nut. Work will not move under the heaviest load. Maximum Opening. Supplied complete with a steel crank handle. Totally enclosed design prevents the ingress of foreign matter and damage to the screw and nut.

SPECIFICATIONS:
Size in Inches - 2 / 3 / 4 / 5 / 6 / 8 / 10 / 12

Approx. Rs 2,828 / PIECEGet Latest Price

Product Details:

• MACHINE VICES
• COMPOUND SLIDING & ROTARY MILLING TABLES
• ANGLE PLATES & V-BLOCKS
• MMAGNETIC TOOLS
• BENCH & WOOD WORKERS VICES
• CLAMPS & CLAMPING ELEMENTS

Approx. Rs 10,593 / PieceGet Latest Price

Product Details:

BODY : High Tensile, wear resistant Cast iron, Front & Back mounting.

SCROLL : Alloy Steel hardened scroll. Thread ground from both sides.

JAWS : Case hardened steel. Precisely ground for accuracy.

PINION : Alloy steel hardened.

STD. ACC. : (1) A set of reverse jaws (2) Key handle (3) Front mounting bolts.

Approx. Rs 9,385 / VICE / PIECEGet Latest Price

Product BrochureProduct Details:

Approx. Rs 3,357 / PieceGet Latest Price

Product Details:

COMPACT MILLING CLAMP is the most multipurpose, quick and easy to use down-hold milling clamp. It is equally suitable for clamping while all kinds of machining operation on Drilling, Milling, Machining Centre, EDM etc. This clamp does not require any support blocks or any kind of adjustment, clamping is done by simple turning of the removable spanner key.

*Required torque can be achieved manually by tightening spanner included with CMC clamp. Applying extra torque by using extension pipe or by hammering damages the clamp parts and warranty expires.

AVAILABLE IN MODELS :
CMC-12 - 1600 KGS. CLAMPING FORCE MAX.
CMC-14 - 1600 KGS. CLAMPING FORCE MAX.
CMC-16 - 1600 KGS. CLAMPING FORCE MAX.
CMC-18 - 1600 KGS. CLAMPING FORCE MAX.

Height BLock for CMC Clamp :
By stacking one height block over another and a CMC clamp at the top can enable clamping of any height of workpiece. Each height block model HB-CMC-75 increases clamping height range by 75mm.